After assessing the lamp assemblies (see yesterday's entry), I finished assembling the annunciator panel:
1. Finished repositioning the wires inside the annunciator panel, closed up the back plate, and trimmed all wires to the same length.
2. Stripped wires and crimped on all connector pins. Ran wires through braided overwrap. Inserted pins into CPC connector shell. Strain-relieved wires and wrapped with silicone tape.
3. Assembled CPC connector.
4. Installed annunciator panel into the panel. (You might notice that the annunciator panel is now behind the instrument panel, with just the lights showing through. This was a late design change in order to facilitate easier removal of the unit for maintenance. I think it actually looks better this way.)
The annunciator panel itself is now done! Hallelujah. What a project it's been.